Gateway ALR 9200 Using the RCA Window, To Use the RCA Window, •Modifies the resources used by devices, •Modifies the contents of the system by adding and removing devices

Resource Configuration Add-in Window

The resource configuration add-in (RCA) window provides three major functions:

•Creates representations of devices that cannot be discovered by the system (ISA boards)

•Modifies the contents of the system by adding and removing devices

•Modifies the resources used by devices

Using the RCA Window

You can use the RCA window to define or add an ISA board by clicking on the appropriate button. To remove an ISA board, highlight the board in the Devices section of the screen before clicking on the button. You can add only as many ISA boards as there are ISA slots available.

To Use the RCA Window

1.From the SSU main window, launch the RCA by selecting the Resources task under the RCA heading in the task box.

2.When the RCA window appears, it displays messages similar to the following:

Baseboard: System Board

PCI Card: Bus 00 dev 00 -– Host Processor Bridge

PCI Card: Bus 00 dev 0D –- Multifunction Controller

PCI Card: Bus 00 dev 0F –- Ethernet Controller

PCI Card: Bus 00 dev 12 –- Multifunction Controller

PCI Card: Bus 00 dev 14 –- VGA Controller

112 Maintaining and Troubleshooting the Gateway ALR 9200 Server