Gateway ALR 9200 Opening the Front Door, Figure 1: Removing the Access Cover, Place the fingertips of your right hand under the

5.Remove and save the three screws from the back of the access cover (see Figure 1); you will need them later to reattach the cover.

Figure 1: Removing the Access Cover

6.Place the fingertips of your right hand under the built-in handle on the back of the cover. A rounded, rectangular depression in the front middle of the access cover serves as another handle.

7.Using an even pull, slide the cover backward, about an inch, until it stops.

8.Pull the entire cover outward, straight away from the chassis, to disengage the rows of tabs from the notches in the top and bottom edges of the chassis. Set the cover aside.

Opening the Front Door

The front door is secured to the bezel by a key lock. This lock has three positions: fully locked, front door unlocked, and front and access cover unlocked. When the front door is unlocked, you can remove it by opening it fully and lifting the hinges out of the slots that hold them.

4 Maintaining and Troubleshooting the Gateway ALR 9200 Server