GE EPM 6000 Multi-function Power Metering System instruction manual Using the Meter

	INSTALLATION CONSIDERATIONS	3-5
	CT LEADS TERMINATED TO METER	3-6
	CT LEADS PASS-THROUGH(NO METER TERMINATION)	3-6
	QUICK CONNECT CRIMP CT TERMINATIONS	3-7
	VOLTAGE AND POWER SUPPLY CONNECTIONS	3-7
	GROUND CONNECTIONS	3-8
	WIRING DIAGRAMS	3-9
	DESCRIPTION	3-9
	WYE, 4-WIRE WITH NO PTS AND 3 CTS, 3 ELEMENT	3-10
	WYE, 4-WIRE WITH NO PTS AND 3 CTS, 2.5 ELEMENT	3-11
	WYE, 4-WIRE WITH 3 PTS AND 3 CTS, 3 ELEMENT	3-12
	WYE, 4-WIRE WITH 2 PTS AND 3 CTS, 2.5 ELEMENT	3-13
	DELTA, 3-WIRE WITH NO PTS AND 2 CTS	3-14
	DELTA, 3-WIRE WITH 2 PTS AND 2 CTS	3-15
	CURRENT-ONLYMEASUREMENT (THREE-PHASE)	3-16
	CURRENT-ONLYMEASUREMENT (DUAL-PHASE)	3-17
	CURRENT-ONLYMEASUREMENT (SINGLE-PHASE)	3-18
	COMMUNICATIONS SETUP	3-19
	DESCRIPTION	3-19
	IRDA COM1 PORT	3-19
	RS485 COM2 PORT	3-19
4: USING THE METER	FRONT PANEL INTERFACE	4-1
	DESCRIPTION	4-1
	FACEPLATE ELEMENTS	4-1
	FACEPLATE BUTTONS	4-2
	PERCENTAGE OF LOAD BAR	4-3
	WATT-HOURACCURACY TESTING (VERIFICATION)	4-4
	CONFIGURING THE METER VIA THE FRONT PANEL	4-5
	OVERVIEW	4-5
	START UP	4-5
	MAIN MENU	4-6
	RESET MODE AND PASSWORD ENTRY	4-6
	CHANGING SETTINGS IN CONFIGURATION MODE	4-9
	DESCRIPTION	4-9
	CONFIGURING THE SCROLL FEATURE	4-9
	PROGRAMMING THE CONFIGURATION MODE SCREENS	4-10
	CONFIGURING THE CT SETTING	4-11
	CONFIGURING THE PT SETTING	4-12
	CONFIGURING THE CONNECTION SETTING	4-13
	CONFIGURING THE COMMUNICATION PORT SETTING	4-14
	OPERATING MODE	4-17
	DESCRIPTION	4-17
5: COMMUNICATIONS	MODBUS COMMUNICATIONS	5-1
	MEMORY MAP DESCRIPTION	5-1
	MEMORY MAP	5-1
	MODBUS MEMORY MAP NOTES	5-7
	MODBUS MEMORY MAP DATA FORMATS	5-9
	DNP POINT MAPPING	5-10
	DNP POINT MAPS	5-10
	DNP POINT MAP NOTES	5-12

TOC–2 EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE