GE EPM 6000 Multi-function Power Metering System instruction manual Address

CHAPTER 4: USING THE METER

ZSelect “rtU” for Modbus RTU, “ASCI” for Modbus ASCII, and “dnP” for the DNP 3.0 protocol.

•The first POrt screen is meter address (Adr). The current address appears on the screen.

ZSelect three-digit number for the address.

Refer to Programming the Configuration Mode Screens on page 4– 10 for details on changing values.

Address 005

•The next POrt screen is the baud rate (bAUd). The current baud rate is displayed on the “B” screen. Refer to Programming the Configuration Mode Screens on page 4–10 for details on changing values. The possible baud rate screens are shown below.

•The final POrt screen is the communications protocol (Prot). The current protocol is displayed on the “B” screen.

Refer to Programming the Configuration Mode Screens on page 4–10 for details on changing values. The three protocol selections are shown below.

EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 4–15