12. Keypad Panel
Part Names and Functions
Digital monitor:
In program mode, the key- pad displays the various function codes and data values. During operation, it displays the output fre- quency, current, voltage, etc. If a fault occurs, the causes of the problem will be dis- played as a code.
8. 8. 8.
PRG
RESETRUN
FUNC | STOP | |
DATA | ||
|
RUN key: This key is used for starting operation. The LED (green) lights up during operation. This key does not function when terminal opera- tion control F02_ _ 1 is selected.
PROGRAM key (RESET key): Normal mode or pro- gram setting mode select key. If a fault occurs, this key is used to reset the fault.
FUNCTION key (DATA key): During normal mode, this key
can be used to change the display unit (frequency display and output current dis- play) while operation is either stopped or running. During the program setting mode, this key can be used to read and write the function codes and data.
| STOP key: This key is |
| used for stopping |
| operation. This key |
| does not function |
| when terminal opera- |
| tion control F02 _ _1 |
| is selected. |
UP/DOWN keys: These keys increase or decrease the frequency. When unit is in program setting mode, they change the function code or data values.
Controlling Method for Keypad Panel
1) Monitor change
During the normal mode, frequency display and output current display can be changed by pressing the FUNC/DATA key.
2) Run/Stop
F U N C
D ATA
6 | 0 . | 0 |
| 1. | 2 | A | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F U N C
D ATA
When F02 is _ _ 0): Press RUN) to run drive; press STOP to stop drive.
3) Frequency change
When F01 is _ _ 0: Press UP to increase frequency; press DOWN to decrease frequency.
Note) If FUNC/DATA is pressed while pressing UP or DOWN, frequency changing speed increases.
22
