GE FVR-C9S-2UX Drive Series Multistep Speed Setting 1 Speed, Multistep Speed Setting 2 Speed

			FVR-C9S-2UX
			Multistep Speed Setting 1 (Speed 1)
F	2	9
F	3	0	Multistep Speed Setting 2 (Speed 2)
F	3	1	Multistep Speed Setting 3 (Speed 3)

Multistep speeds can be set within a range of 0 to 120 Hz only by changing the contact signal from outside. (X1-CM X2-CM). Setting of speed of optional step is possible within a range of 0 to 120 Hz during drive operation

(Note1) X1 or X2 terminal is selected via THR/BX terminal function change (F27, F28) (Note 2) In selecting THR/BX terminal function (F27, F28) individual setting is possible.

Terminal / Function Code	F27 : 1	F27: 0	F27: 1	F27: 0
	F28: 0	F28: 1	F28: 1	F28: 0
THR	X1	External Alarm input	X1	External alarm imput
BX	Motor coast-to-stop	X2	X2	Motor coast-to-stop
	command imput			command imput

C92-09

Speed 0 Frequency setting is made by either the analog signal or the keypad panel.

THR-CM (X1)

BX-CM (X2)

FWD-CM

Speed 1

Speed 2

Speed 3

Speed 0

Time

ON ON

ON

ON

33