Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Care and cleaning.

 

 

 

 

 

Cleaning the Oven Door

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To clean the inside of the door:

on the outside of the door. Do not let

 

 

 

 

 

■ Because the area inside the gasket

water drip into the vent openings.

 

 

 

 

 

is cleaned during the self-clean cycle,

■ If any stain on the door vent trim is

 

 

 

 

 

you do not need to clean this area

persistent, use a soft abrasive cleaner

 

 

 

 

 

by hand.

and a sponge-scrubber for best results.

 

 

 

 

 

Do not rub or clean the door gasket—

■ The area outside the gasket and

■ Spillage of marinades, fruit juices,

it has an extremely low resistance to

the door liner can be cleaned with a

tomato sauces and basting materials

abrasion.

soap-filled or plastic scouring pad,

containing acids may cause

If you notice the gasket becoming worn,

hot water and detergent. Rinse well

discoloration and should be wiped

frayed or damaged in any way or if it has

with a vinegar and water solution.

up immediately. When surface is cool,

become displaced on the door, you should

To clean the outside of the door:

clean and rinse.

have it replaced.

■ Do not use oven cleaners, cleaning

 

 

 

 

 

■ Use soap and water to thoroughly

 

 

 

 

 

powders or harsh abrasives on the

 

 

 

 

 

clean the top, sides and front of the

 

 

 

 

 

outside of the door.

 

 

 

 

 

oven door. Rinse well. You may also

 

 

 

 

 

 

 

 

 

 

 

use a glass cleaner to clean the glass

 

 

Lift-Off Oven Door

 

 

 

 

The door is very heavy. Be careful when

With the

Bottom

Hinge arm

 

removing and lifting the door.

door at the

 

edge

 

 

Do not lift the door by the handle.

same angle as

of slot

 

 

the removal

 

 

Slot

To remove the door:

 

 

position, seat the

 

 

 

 

Fully open the door.

indentation of

 

 

 

the hinge arm

 

 

 

Pull the hinge locks down toward

 

Indentation

 

into the bottom

 

 

 

the door frame, to the unlocked

edge of the hinge slot. The notch in

 

position. A tool, such as a small flat-

the hinge arm must be fully seated

Hinge lock

blade screwdriver, may be required.

into the bottom of the slot.

 

 

Fully open the door. If the door will

Pull hinge locks down to unlock

Firmly grasp both sides of the door

 

at the top.

not fully open, the indentation is

 

Close door to the door removal

not seated correctly in the bottom

 

edge of the slot.

 

 

position (see illustration).

 

 

Push the hinge locks up against the

 

Lift door up and out until the hinge

 

front frame of the oven cavity, to the

 

arm is clear of the slot.

 

locked position.

 

 

 

 

 

To replace the door:

 

 

 

Removal position

Firmly grasp both sides of the door

Hinge

 

 

arm

 

 

 

at the top.

 

 

 

Hinge

 

 

 

 

 

 

 

 

lock

 

 

 

 

Push hinge locks up to lock

 

 

 

Close the oven door.

 

Consumer

Probe

 

The temperature probe may be cleaned

 

with soap and water or a soap-filled

 

scouring pad. Cool the temperature

 

probe before cleaning. Scour stubborn

 

spots with a soap-filled scouring pad,

40

rinse and dry.

 

■Do not immerse the temperature probe in water.

■Do not store the temperature probe in the oven.