Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Before you call for service…

Troubleshooting Tips

Problem

 

Possible Causes

What To Do

 

 

 

 

 

Display “wakes up”

 

The Display is equipped with

• The Display should return to its standby mode after

without touching it

 

a sensing technology that will

10 minutes if no further interaction occurs.

 

 

“wake up” when you (your hand)

 

 

approaches the Touch Screen.

 

 

 

The display is sensitive and may

 

 

 

“wake up” when lights are turned

 

 

on or due to the movement

 

 

 

of nearby people or objects.

 

 

 

 

 

 

“F— and a number

 

You have a function

• Touch the CLEAR/OFF pad. Allow the oven to cool for

or letter” flash

 

error code.

one hour. Put the oven back into operation.

in the display

 

 

 

 

 

If the function code repeats.

• Disconnect all power to the oven for at least 30

 

 

 

 

 

 

seconds and then reconnect power. If the function

 

 

 

 

error code repeats, call for service.

 

 

 

 

Display goes blank

 

A fuse in your home may

• Replace the fuse or reset the circuit breaker.

 

 

be blown or the circuit

 

 

 

breaker tripped.

 

 

 

 

 

 

 

The clock is in the

• See the Options–Settings section.

 

 

black-out mode.

 

 

 

 

 

Display flashes

 

Power failure.

• Reset the clock.

 

 

 

 

“PROBE” appears in

 

This is reminding you to

• Enter a probe temperature.

the display

 

enter a probe temperature

 

 

 

after plugging in the probe.

 

 

 

 

 

Power outage,

 

Power outage or surge.

• Reset the clock. If the oven was in use, you must reset

clock flashes

 

 

 

it by touching the CLEAR/OFF pad, setting the clock

 

 

 

 

and resetting any cooking function.

 

 

 

 

Steam from the vent

 

When using the convection

• This is normal.

 

 

feature, it is normal to see

 

 

 

steam coming out of the

 

 

 

oven vent. As the number

 

 

 

of racks or amount of

 

 

 

food being cooked increases,

 

 

 

the amount of visible steam

 

 

 

will increase.

 

 

 

 

 

“Burning” or “oily”

 

This is normal in a new oven

• To speed the process, set a self-clean cycle for a

odor emitting from

 

and will disappear in time.

minimum of 3 hours. See the Using the self-cleaning

the vent

 

 

 

oven section.

 

 

 

 

Strong odor

 

An odor from the insulation

• This is temporary.

 

 

around the inside of the

 

 

 

oven is normal for the first

 

 

 

few times the oven is used.

 

 

 

 

 

Fan noise

 

A cooling fan or a convection

• This is normal. The cooling fan will turn on

 

 

fan (depending on the

to cool internal parts. It may run for up to 1-1/2

 

 

function you are using)

hours after the oven is turned off. The convection

44

 

may automatically turn on.

fan will cycle on and off until the function is over

 

 

 

or the door is opened.