GE 49-80575-1, Quick Set V, Quick Set VI adjustment, being used, is crooked, BROIL HI/LO, won’t close, for broiling, of the range, Food does not, broil properly, Storage drawer, Storage drawer

GEAppliances.com

Problem	Possible Causes	What To Do
Food does not bake	Oven controls improperly set.	• See the Using the oven section.
or roast properly
	Rack position is incorrect	• See the Using the oven section.
	or the rack is not level.
	Incorrect cookware or	• See the Using the oven section.
	cookware of improper
	size being used.
	Oven thermostat needs	• See the Adjust the oven thermostat—Do it yourself!
	adjustment.	section.
Food does not	Oven controls improperly set.	• Make sure you touch the BROIL HI/LO pad.
broil properly
	Improper rack position	• See the Broiling Guide.
	being used.
	Cookware not suited	• For best results, use a pan designed for broiling.
	for broiling.
	The probe is plugged	• Unplug and remove the probe from the oven.
	into the outlet in the oven.
	(on some models)
	In some areas the power	• Preheat the broil element for 10 minutes.
	(voltage) may be low.	• Broil for the longest period of time recommended
		in the Broiling Guide.
Oven temperature	Oven thermostat	• See the Adjust the oven thermostat—Do it yourself!
too hot or too cold	needs adjustment.	section.
Storage drawer	Rear drawer support is	• Reposition the drawer. See the Storage Drawer
is crooked	on top of the guide rail.	Removal instructions in the Care and cleaning of the
		range section.
		• Check to make sure drawer is properly seated
		if removed.
Storage drawer	Power cord may be	• Reposition the drawer and power cord. See the
won’t close	obstructing drawer	Storage Drawer Removal instructions in the Care and
	in the lower back	cleaning of the range section.
	of the range.
	Rear drawer support is	• Reposition the drawer. See the Storage Drawer
	on top of the guide rail.	Removal instructions in the Care and cleaning of the
		range section.
Oven door is crooked	The door is out of position.	• Because the oven door is removable, it sometimes gets out
		of position during installation. To straighten the door, push
		down on the high corner.

45

Instructions Safety

Instructions Operating

Support Consumer Tips Troubleshooting Cleaning and Care