Instructions

Using the surface units—Touch pad-controlled models.
Surface Unit Cook Settings

Safety

The power level with a fraction indicates the additional half-step setting. You may hear clicking sounds indicating the control is maintaining your desired setting.

The cooktop offers 19 power levels. Power levels range from “L” to HI in precise half- step increments. For example: 1, 1-1/2, 2, 2-1/2 and up to HI.

Power Level “L”, the lowest setting, is recommended for “Keep Warm.”

The power level increases one-half level with each touch.

NOTE: When changing from a high heat setting to a lower heat setting, the surface unit may stop glowing. This is normal. The unit is still on and hot.

NOTE: This cooktop has a rapid heat-up feature. If the cooktop is cool when turned on, it will glow red for a short period of time until the desired power setting is reached.

Operating

Instructions
Care and Cleaning
Single Surface Unit—Cook Settings

To turn on a single surface unit:

Touch the ON/OFF pad; then touch the (+)/(–)pad.

Use the (+)/(–)pad to choose the desired power setting.

To use the Melt feature:

Touch the ON/OFF pad; then touch MELT. The element will automatically set to a predetermined setting and “L” will be displayed.

To turn off a single surface unit, touch the ON/OFF pad again.

To use the Simmer feature:

Touch the ON/OFF pad; then touch SIMMER. The element will automatically set to a predetermined setting and “3” will be displayed. Adjust using the (+)/(–)pad to increase or decrease the simmer rate.

Consumer Support Troubleshooting Tips

Multi-Ring Burner (can be dual or triple, depending on model)

Touch the ON/OFF pad for the right-front surface unit.

Use the (+)/(–)pad to set the desired power setting.

Touch the BURNER SIZE pad as needed to select the desired burner size.

The light next to the BURNER SIZE pad indicates which size the surface unit is on.

To turn the surface unit off, touch the ON/OFF pad.

See page 10 for additional information.

8