Installation
o@ons
Installation
rulesVentingruzes
The Monogram Component Cooktop System offers the
ultimate in design and cooking flexibility, with modular
cooktops and accessories, providing avariety of cooking
technologies to meet the needs of the most discerning
cook.
Each component can be installed in many orientations
in the countertop.
Both gas and electric components can be combined
within the cooking configurations:
Multiple electric components can operate from a
single junction box, iflocal codes permit.
Multiple gas components can operate from a
manifold, aspermitted by local codes.
-Updraft components can be vented according to
normal exhausting methods.
The downdraft grill or vent blower maybe oriented in
two directions—toward the rear or down as required.
Blower can be mounted to left or right side of vent
housing.
.Gas and halogen components are only 3-1/4” deep,
allowing room for adrawer beneath in many cabinet
styles.
.Optional Remote Control Accessory Kit for downdraft
vent component isavailable for use when remote
control of blower isdesired.
.Always choose cabinetry that enhances installation Always consider option to shorten drawer for gas inlet
process. clearance. (To determine location of gas pipe, refer to
.Always anticipate that cabinet modification maybe cutout illustration in “Design Information, Dimensions
required for European or other custom cabinetry. and clearances. )
Always preplan electrical and gas connections to be .Gas components cannot be converted to liquid
accessible at installation time.
.Always consider distance to power supply, cable propane gas operation.
lengths and bending restrictions before cutting holes.
.Always preplan component locations before installa- .If possible, don’t cut holes for remote mount vent
tion; determine need to reorient downdraft blower control and ductwork locations until components are
discharge direction, or ifblower will need to be on-site, with countertop in place, and all preplanning
relocated to opposite side of vent housing. (Down- locations are confirmed.
draft unit isshipped with blower mounted on left side .Every downdraft vent and downdraft grill cooktop
of housing. )must have acomplete, separate duct run. Ducts from
Always consider how cooktop (and grease collection different downdraft units cannot be combined.
jars) or downdraft vent housing affect cabinet type .Do NOT install adowndraft vent behind acooktop,
selection (especially drawers). UNLESS you use accessory kit 3-AO1Oto move the
.Always provide clearance for remote mount vent control to the front of the cabinet.
control wiring box when installing on cabinet face .Do NOT install agas or grill cooktop where the knobs
between components, or other locations. are between the heated area and the downdraft vent.
.Always anticipate base cabinet storage arrangements to .Do NOT install an updraft grill cooktop next to a
accommodate downdraft blower and duct locations. downdraft vent.
.Never vent acooktop into an interior space–always
to outdoors.
.Do not install an updraft grill unless overhead vent
is300 CFM or more.
39