7Installation
Step (continued)
Jonung
additional
cooktopto
downdrafi
ventor to
downdrafi~“11
I
Securing
cooktop(s)to
countertop
42)~Frontof Countertop
Diagram 53.1
Remove endcap on side of next cooktop to bejoined. Place cooktop next to downdraft vent in cutout.
Pre-tap holes in downdraft joiner and endcaps by -Drive two Phillips head screws into pre-tapped holes
driving supplied screws through holes and then using Phillips screwdriver bit socket.
backing out before installation. This will facilitate the To install additional downdraft vent or cooktop refer
joining process later on. to “Joining multiple coolitops”.
-Attach downdraftjoiner strip to cooktop.
Loosen screws retaining holddown brackets at each I
end of cooktop. Extend holddown brackets. Tighten I\\\
screws.
oDrive long screw (two lengths provided) through
bracket until screw pressure against bottom of =$==
countertop secures cooktop.
Llagram 53.?
53