Installation
Component Cooking Surfaces
hInstallation If necessary, the blower maybe rotated 90° keither
Step /
(continued) direction, or relocated to opposite side of vent housing.
Remove filter from vent housing with Phillips
screwdriver.

Reorient

blower

oRemove blower side plate
nutdriver and set aside.
(four nuts) with 5/1 6“
.Remove blower (four nuts) with 7/16“ socket wrench
from inside vent housing and set aside.
Remove blower, rotate to new position and reinstall.
-Replace and tighten four nuts using 7/ 16“ socket
wrench inside vent housing.
-Replace blower side plate and secure (four nuts) using
5/1 6“ nutdriver.
Reposition filter inside throat of vent housing.
D/agram 541
Diagram S42
Dfagram543
!hagram544
54