10
Assemble
Step burners,
ctick
ignition
Electric Components:
Push in and turn each knob to high position. Make
sure each heating element heats up.
Gas Components:
(Electrical connections should be complete.)
“Plug power cord into outlet.
“Assemble burner as shown.
“Check for proper ignition:
-Push in one control knob and turn 90° to HIGH
position.
“First test may require some time, while air isflushed
out of the gas line:
-Turn knob to OFF.
–Repeat the procedure for each burner.
?Bumer
<WGrate
IE-’
~Trim Ring
1
Dfagram571