Inventory |
| Clean Up |
|
|
|
|
|
|
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we
Inventory: (Figure 8) | Qty | |
A. | Ironworker (not shown) | 1 |
B. | Guide Bar Assembly | 1 |
C. | Extension Bar Assembly | 1 |
D. | Toolbox | 1 |
E. | Cap Screws | 3 |
F. | Lock Washers (Guide Bar) | 3 |
G. | Punch Adapter 9036 | 1 |
H. | Punch Adapter 81031 | 1 |
I. | Punch Adapter 81029 | 1 |
J. | Spanner Wrench | 1 |
K. | Adjustable Wrench | 1 |
L. | Grease Gun | 1 |
M. | Hex Wrench 17mm | 1 |
N. | Hex Wrench 14mm | 1 |
O. | Hex Wrench 12mm | 1 |
P. | Hex Wrench Set | 1 |
The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 9. For thor- ough cleaning, some parts must be removed.
For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo-
Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.
Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a
G
B
D
F E 
I
H
C
J
K
P
L
M
N
O
well ventilated area.
A great product for removing the waxy shipping grease from your machine during clean up.
