Examining the Imager’s Housing | Hand Held Products 4410, 4710

Examining the Imager’s Housing

Routinely examine the Imager’s housing for signs of damage. A damaged housing may cause the internal components to move and may result in a malfunctioning Imager.

Replacing the Interface Cable

The standard interface cable is attached to the Imager with an 10-pin modular connector. When properly seated, the connector is held in the Imager’s handle by a flexible retention tab. The cable is designed to be field replaceable.

••Order replacement cables from or from an authorized distributor.

••When ordering a replacement cable, specify the cable part number of the original interface cable.

To Replace the IT4410 Interface Cable:

1.Turn the power to the host system OFF.

2.Disconnect the Imager’s cable from the terminal or computer.

3.Locate the small hole on the side of the Imager’s handle near the base (cable release).

4.Straighten one end of a paper clip.

5.Insert the end of the paper clip into the small hole and press in. This depresses the retention tab, releasing the connector. Pull the connector out of the Imager’s handle while maintaining pressure on the paper clip.

Cable Release

6.Replace with the new cable.

Insert the connector into the opening at the base of the Imager’s handle.

Press firmly. The connector is “keyed” to go in only one way, and will click into place.

11 - 2

IMAGETEAM™ 4410/4710 User’s Guide

Image 184

Hand Held Products 4410, 4710 manual Examining the Imager’s Housing, Replacing the Interface Cable

Contents

User’s Guide FCC Class B Compliance Statement Statement of Agency ComplianceCanadian Notice Patents LED Safety StatementDisclaimer Page Table of Contents Scan Stand Symbol Symbologies Message Length Check Digit OCR Programming Software Development Kit Visual Menu Viii About the Hand-Held and Fixed Mount 2D Imager Introduction and InstallationAbout this Manual Imageteam 4410 Convenience Kit Unpacking the ImagerImageteam 4710 Convenience Kit Imageteam 4410/4710 User’s Guide IT4410 Imager Identification Hand Held IT4410 Imager Bottom View IT4710 Imager Identification Hand Held IT4710 Imager Bottom View Connecting the Scanner in Keyboard Wedge Mode Connecting the Scanner to a Serial Port Reading Techniques Programming Introduction All Symbologies Reset Factory SettingsStatus Check Revision Selections Terminal Interface Supported Terminals Chart Terminal Models Keyboard Country Country Code Scan Keyboard Style Mode On Keypad Mode Off Keyboard Modifiers Keyboard Function Relationships Function Code HEX/ASCII Value Full Ascii Ctrl + Communication Settings Parity Baud Rate Word Length Stop Bits Word Length Data BitsData Bits Hardware Flow Control Software Flow Control Serial Triggering Trigger Timeout Power Saving Mode Power Hold Mode LED Power Level Aimer Delay LED Flashing Aimer Interval Window Position Default Minimum Maximum Serial Command Centering Top Imageteam 4410/4710 User’s Guide AutoTrigger Scan Stand Scan Stand Symbol Presentation ModePresentation Re-trigger Delay Presentation Default Presentation Lights Beeper Volume Fast Omni ModeMedium Power Up Beeper Beeper DefaultOutput Sequence Beeper Beep On Decode Intercharacter Delay Intercharacter, Interfunction Intermessage DelaysUser Specified Intercharacter Delay Interfunction Delay Intermessage Delay Prefix/Suffix Overview Points to Keep In Mind Adding a Prefix or Suffix Example Add a Suffix to a specific symbologyClearing One or All Prefixes or Suffixes Add a Code I.D. Prefix to All Symbologies Add a Carriage Return Suffix to All SymbologiesAdd an AIM I.D. Prefix to All Symbologies Suffix Entries Prefix EntriesExit Selections Symbology Chart Symbology CodeHex Symbology Code Hex Decimal to Hex to Ascii Conversion Chart Ascii Data Format Editor Overview Format Editor Commands Search Commands Miscellaneous Commands Data Format Editor Save Current Data Format Changes Discard Current Require Data Format Data FormatterShow Data Formats Alternate Data Formats Output Sequence Overview Output Sequence ExampleOutput Sequence Editor Character Match Sequences Require Output Sequence SEQBLK62999941FF6A999942FF69999943FF On/Not Required Output Sequence Editor Save Current Output Sequence Changes Discard Current Multiple Symbols No Read † Set Print Weight Print WeightFunction Code Transmit Video Reverse Imageteam 4410/4710 User’s Guide Symbologies Start/Stop Characters Linear Symbologies CodabarMessage Length Linear Symbologies Check Character Linear Symbologies Code Transmit Full Ascii Check Character Default All Code 11 Settings Check Digits Required One Check Digit Linear Symbologies Interleaved 2 Check Digit Linear Symbologies Iata 2 MSI Linear Symbologies MSI Default All Code 93 Settings Default All Code 128 Settings Isbt EAN/JAN EAN/JAN 8 Addenda Required EAN/JAN 8 AddendaEAN/JAN 8 Addenda Separator Default all EAN/JAN 13 Settings EAN/JAN 13 Addenda Required EAN/JAN 13 AddendaEAN/JAN 13 Addenda Separator Number System UPC a Addenda Required UPC a AddendaUPC a Addenda Separator UPC E0 Linear Symbologies UPC E0 Version E ExpandUPC E0/E1 Addenda Expand UPC E0/E1 Addenda Required UPC E0/E1 Addenda Separator Linear Symbologies RSS-14 RSS-14 Limited Linear Symbologies RSS-14 Expanded Stacked Symbologies Codablock Stacked Symbologies Off Stacked Symbologies Stacked Symbologies Code Stacked Symbologies Eanucc Composite Codes TLC39 Postal Symbologies Postal Service Postnet Code Planet Code Postal Symbologies British Post Office 4 State Code Japanese Postal ServiceCanadian 4 State Code Dutch Postal Code 2D Matrix Symbologies QR Code 2D Matrix Symbologies Data Matrix 2D Matrix Symbologies MaxiCode Structured Carrier Message Only 2D Matrix Symbologies Aztec Code Diagnostics Test Menu 2D PQA Print Quality Assessment Imageteam 4410/4710 User’s Guide OCR Programming OCR-B OCR OCR Direction Creating an OCR Template Creating OCR TemplatesTemplate Characters 37680981 Stringing Together Multiple Formats Creating Or Statements Creating a User-Defined Variable Adding an OCR Check Character Reading Multi-Row OCR Abcdefgh OCR Template Codes Enter OCR Template † Imageteam 4410/4710 User’s Guide Default Charts Parameter Default SettingCommunication RS Selections Imager Selections Linear Symbologies Data Formatter SelectionsOutput Sequence Selections Codabar Interleaved 2 Parameter Default Setting CodeIata 2 Postal Symbology Selections Aztec Code OCR SelectionsCurrency Imageteam 4410/4710 User’s Guide Software Development Kit Features of the SDKSoftware Development Kit SDK Imageteam 4410/4710 User’s Guide Installing Quick*View from the Web Setting Up the Imager and the Quick*View SoftwareQuick*View Quick*View Demonstration Software Instructions Temporary Quick*View Configuration Using the Quick*View Software If Communication Cannot Be Established Scan Data Window Snapshot Saving an Image File Open Com Port Reporting Firmware Revision Trigger Settings Imager Power SettingsLoad New Imager Software RS-232 Serial Commands Serial Programming Commands Command Center Buttons Responses Query Commands Examples of Query CommandsEnter cbrena Response CBRENA0-1ACK Enter cbrena Response CBRENA1ACK Trigger Commands Enter cbr? Response CBRENA1ACK Button Bar Serial Programming Commands Communication SettingsSelection Setting Serial Command Status Check TRGSER0 PWRON1 Prefix/Suffix Selections Linear Symbology Selections CBRCK20 IMSENA1 1MSENA1 UPACKX0 Stacked Symbology Selections 2D Matrix Symbology Idmdft Ocrdft Image Commands Help File Imaging CommandsImage Ship Image Capture/Ship and Image Get Commands Jpeg Image Quality Intelligent Signature Capture Commands Image Cropping/Shipping Example Imgbox Modifiers Negative Positive 0123456789 File Format Imageteam 4410/4710 User’s Guide Imageteam 4410/4710 User’s Guide Imageteam 4410/4710 User’s Guide Visual Menu Introduction Visual MenuVisual Menu Operations Temporary Visual Menu Configuration Installing Visual Menu from the Web Interface Keys Wyse PC/AT Supported IBM, Memorex Interface Keys Telex Reserved Supported Esprit 200 Interface Keys Ansi Ascii F13 Print Imageteam 4410/4710 User’s Guide Product Specifications IT4410 Product Specifications & PinoutsParameter Specification Product Specifications IT4710 Parameter Specification Depth of Field Charts Depth of Field for High Density Imager 2 Nominal FocusDepth of Field for High Density10 Imager 3 Nominal Focus Depth of Field for Long Range Imager 5 Nominal Focus Depth of Field for LX Imager 7 Nominal Focus RS-232 Output, External Power Cable Pinouts Connector Part Numbers TTL RS-232 and Laser Emulation ConnectorOptics Connector Decoder Board Output Flex Strip IT4410 Dimensions IT4710 Dimensions Imageteam 4410/4710 User’s Guide Maintenance & Troubleshooting MaintenanceCleaning the Imager’s Window Inspecting Cords and Connectors Replacing the Interface Cable Examining the Imager’s HousingTo Replace the IT4410 Interface Cable Troubleshooting Guide TroubleshootingTo Replace the IT4710 Interface Cable Imageteam 4410/4710 User’s Guide Product Service and Repair Customer Support Limited Warranty Online Product Service and Repair AssistanceTechnical Assistance Online Technical Assistance Imageteam 4410/4710 User’s Guide Imageteam 4410/4710 User’s Guide Index Index LED Default 2-25,2-27 Index Index Index Sample Symbols 55836540 Aztec Programming Chart OCR Save Programming Chart Programming Chart Hand Held Products, Inc