Aimer Interval
Aimer Interval turns off the aiming light, or programs the aimer to come on at certain intervals when reading symbols with the scanner. You may program the scanner to use the aimer Every Read, Every Second Read, or Every Third Read. You may also program the scanner to use the aimer every “x” reads, by entering a number from 0 to 999 to indicate “x.”
Off | * Every Read |
Every Second Read | Every Third Read |
| Every “x” Reads ‡ |
Note: ‡ | A one- to three digit number and Save are |
required after reading this programming symbol. Refer to the Programming Chart (inside back cover).
IMAGETEAM™ 4410/4710 User’s Guide | 2 - 19 |
