As with all digital products, it is essential that you maintain a constant check on battery condition and preferably have a
CAUTION
If you remove the digital back, be very careful not to touch or scratch the CCD/filter surface while it is exposed.
Always attach the protective cover for transportation or storage.
Powering the digital back
The CFV requires power either from the battery (7.2V Sony InfoLithium L type −
To attach a battery:
1.Firstly, ensure the battery is fully charged (see user appropriate manual for battery and charger).
2.Position the battery as in the illustration.
3.Press the battery towards the camera. This automatically depresses the battery retaining catch.
4.Slide the battery into the final position ensuring the contact prongs on the camera are inserted into the battery. The battery retaining catch will now return to the safe- ty position
To remove a battery:
1.Depress the battery retaining catch and slide the battery over it. It can then be freely removed.
FireWire connection:
1.Simply connect the FireWire cable between the FireWire connector on the digital back and the USB port on the computer.
ON / OFF button
With a fully charged battery fitted or when tethered to a computer, press the ON/OFF (
) button to activate the digital back. An audible signal will be heard and a Hasselblad logo splash screen will appear on the OLED. The back will enter standby mode after the preset time to save the battery. Press the ON/OFF button again to turn the digital back off. An audible signal will be heard again to confirm this.
11
