Hasselblad 3034216 user manual Shutter Delay, Exposure Time, Capture Sequence

		500
1	2	For use with 500C/CM, 501C/CM and 503 CX/CXi/CW mod-
		els.
		• Make a 500 setting.

Shutter Delay

		There can be differences in the amount of time required in prepara-
		tion (raising the mirror, opening/closing the shutter etc) for digital
		capture between various camera models. This corrective feature
		adjusts the time a little to ensure the image is read out from the
3	4	sensor. The normal setting is Default and should only be changed
		if problems are encountered.

Exposure Time

This setting should be changed for cable-free exposure times longer than 1/8 second, ensuring that it matches the set shutter speed on the lens. The settings range from 1/8 second to 32 seconds (1/8 second is the default setting). The ELD also has a “Bulb” setting.

5	6	Capture Sequence
		This feature functions in the same manner as an interval timer
		and only works in conjunction with a motor or winder driven
		camera model except in the case of the Pinhole setting where it is
		the only way of controlling such exposures (see later section for
		full details).
		Initial delay: Controls the amount of time required to elapse before
		the first exposure.
		Delay: Controls the amount of time required between each ex-
		posure.
7	8	Count: Controls the total number of exposures required.

Setting CAMERA model and options

Proceed as follows:

1. Press the menu (MENU) button to open the menu.

	2.	Use  and  to select the SETTINGS sub-menu.
9	3.	Press  to open the SETTINGS menu.
	4.	Use  and  to select CAMERA.
	5.	Press  to open the CAMERA menu.
	6.	Press either the or button to select camera model.

7. Use  and  to select SHUTTER DELAY or EXPOSURE TIME if required.

8. Press either the or button to make new settings if required.

9. Press the menu (EXIT) button to exit the menu system and keep your settings.

49