STEP 3.
LOG #3 (SRV2107-703):
Place the notch on the tip of log #3 over the locating tab on log #1. Place the left leg of the log on the far left grate tine (A). See Figure 12.15.
STEP 4.
LOG #4 (SRV2107-704):
Place the left formed end of log #4 on the burner detail located under log #3, and the notch on the right end of log #4 on the front grate bar. Log #3 may need to be adjusted for proper placement. See Figure 12.16
STEP 5.
LOG #5 (SRV2107-705):
Place log #5 on the left side between the grate tine and firebox. Note: This log will be used to support log #6. See Figure 12.17.
TAB
A
3
Figure 12.15
4
NOTCH FITS
ON BURNER
DETAIL
NOTCH FITS OVER FRONT GRATE BAR 
Figure 12.16
5
Figure 12.17
Heat & Glo • | 43 |
