Hearth and Home Technologies CERONA-42 owner manual Dvp-Trap

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8in.

(203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

					Term Cap	Minimum	Maximum
						Effective Length	Effective Length
						3-1/8 in.	4-5/8 in.
		12 in.		Max	Trap1
			Effective			79 mm	117 mm
	(305 mm)
			Length
	DVP-TRAP				Trap2	5-3/8 in.	9-3/8 in.
						137 mm	238 mm
Horizontal Termination Cap

DVP-TRAP1 DVP-TRAPK1

DVP-TRAP2

DVP-TRAPK2

DVP-HPC1 DVP-HPCK1-B

DVP-HPC2 DVP-HPCK2-B

Figure 16.3 DVP vent components

54 Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. H • 11/08