Figure 12.6.

Step 5. Carefully place a layer of stones over the pilot shield to disguise it.

Figure 12.7.

Step 6. Spread the stones out evenly. Double check that there is only one layer of stones on the burner area and that the cross-hatched area in Figure 1 is still free of stones.

Figure 12.8.

Step 7. Carefully remove the stone placement jig making sure that no stones fall into the pilot area.

NO STONES IN THIS AREA

Figure 12.9.

Step 8. This is a view of the front area of the pilot shield. This area must be free of stones for safe operation.

36

Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12

Page 36
Image 36
Heat & Glo LifeStyle 2137-900 owner manual No Stones in this Area