Note: The clearance to ceil- ing is measured from the top of the unit and it does not
Ainclude the standoffs.
B
C
D
1 in.
E (25 mm)
J
F
G
H
NOTE: FRAME OPENING HEIGHT IS GREATER THAN PLASTER OPENING HEIGHT.
I
*MINIMUM FRAMING DIMENSIONS
|
| A |
| B | C |
| D | E | F | G | H | I | J | |
Models | DVP Pipe | SLP Pipe | Rough | **DVP Pipe | SLP Pipe | Rough |
|
|
|
|
|
| ||
|
|
|
|
| Clearance | Combustible | Combustible | Behind | Sides of | Front of | ||||
Rough |
| Rough | Rough | Rough | ||||||||||
|
|
| Opening | Opening | to Ceiling | Floor | Flooring | Appliance | Appliance | Appliance | ||||
|
| Opening |
| Opening | Opening | Opening | ||||||||
|
|
| (Height) | (Width) |
|
|
|
|
|
| ||||
|
| (Width) |
| (Width) |
| (Depth) | (Depth) |
|
|
|
|
|
|
|
in. | 10 |
| 34 | 32 | 0 | 0 | 1/2 | 1/2 | 36 | |||||
| mm | 254 |
| 219 | 832 | 413 | 413 | 864 | 813 | 0 | 0 | 13 | 13 | 915 |
*Adjust framing dimensions for interior sheathing (such as sheetrock) C** Add 12 in. (305 mm) for rear venting with one 90º elbow.
Figure 5.3 Clearances to Combustibles
22 | Heat & Glo • |
|
