Top Vent - Horizontal Termination - (continued)
Two Elbows
Note: A 6 in. (152 mm) section of straight flue must be attached to the heater before a 90° elbow.
USE SLP SERIES COMPONENTS ONLY
V1 Minimum | H1 + H2 Maximum | ||
Elbow only | Not allowed | ||
6 in. | 152 mm | 1 ft. | 305 mm |
1 ft. | 305 mm | 2 ft. | 610 mm |
2 ft. | 610 mm | 4 ft. | 1.22 m |
3 ft. | 914 mm | 6 ft. | 1.83 m |
4 ft. | 1.22 m | 8 ft. | 2.44 m |
5 ft. | 1.52 m | 10 ft. | 3.05 m |
30 ft. | 9.14 m | 10 ft. | 3.05 m |
V1 + H1 + H2 = 30 ft. (9.14 m) Maximum
H1 + H2 = 10 ft. (3.05 m) Maximum
H2
H1
INSTALLED
HORIZONTALLY
V1
Figure 7.5
28 | Heat & Glo • |
|
