Heat & Glo LifeStyle 350TRSI-AUF DVP-TRAP2, Mm Heat Shield 15-1/8 384 mm, Effective Length

C. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in.

(203 mm) Heat Shield

15-1/8 in.
(384 mm)		Minimum	Maximum
	Term Cap
		Effective Length	Effective Length
	Trap2	5-3/8 in.	9-3/8 in.
		137 mm	238 mm
	Max
12 in.
(305 mm)	Effective
	Length

DVP-TRAP2

Horizontal Termination Cap

DVP-TRAP2

7-1/4 in.

1 in. (184 mm)

(25 mm)

14in.

(356 mm)

3/8 in. (10 mm) 1 in. (25 mm)

7-3/4 to 10-3/8 in.

(197 to 264 mm)

DVP-FBHT

FireBrickTermination Cap

Figure 16.4 DVP vent components

Heat & Glo • 350TRSI-AUF, 350TRSILP-AUF • 2089-980 Rev. o • 6/12 73