Heat & Glo LifeStyle 6000TR After the, Installation, Step Heating Control, Model 6000XLT-CDN

Step 13

Heating Control

Model 6000XLT-CDN

This model is equipped with a baffle which will allow you to control usable heat output. The baffle control lever is located at the lower left corner of the unit behind the lower grille. See Figure 39.

FOR MORE HEAT: Pull the baffle lever forward and down. This will close the baffle.

FOR LESS HEAT: Push the baffle lever back and up to lock. This will open the baffle.

Step 14 Relief Ports Model 6000ARCH

FIGURE 39

Model 6000 ARCH has a relief port built into the underside of the firebox (behind the lower grille). See Figure 40. The port cover plate is spring-loaded to remain closed. The cover plate activates a safety microswitch which is wired to the DSI control valve. See Figure 33 DSI Wiring Diagram.

In the unlikely event of a delayed lighting of the burner, the relief cover plate is designed to open and release the microswitch lever. This will prevent the DSI valve from op- erating until the cover plate is re-set and the microswitch lever closed. To Re-set: 1. Pull and hold the microswitch lever arm DOWN. 2. Push the cover plate UP and release the switch lever arm. See Figure 40.

FIGURE 40

After the	!	LEAVE THIS INSTALLATION MANUAL
Installation
		WITH THE APPLIANCE FOR FUTURE

REFERENCE.

41