Honeywell 11255 FCP Carbon Pleat, Activated Carbon Adsorbers, FCP Performance, Product Design

FCP Carbon Pleat

Activated Carbon Adsorbers

Models FCP*xxxxx (Where * indicates carbon type mod l of 201, 202, 204, 301, 302, 304. See p ice book.)

FCP Series – Activated Carbon Filled Nonwoven Media Adsorbers

The Flanders FCP Series adsorbers are designed for removal of malodorous compounds at low con- centration levels. Utilizing the latest technology in fine mesh activated carbon, the product provides high removal efficiency of nuisance odors.

Product Design

FCP Series filters are pleated activated carbon filled nonwoven media sealed within a moisture resistant beverage board frame. The uniqueness of the product is the filter media. The polyester media is filled with fine mesh activated carbon through the depth of the media. The ultrapure carbon is ther- mally bonded to the polyester fibers providing supe- rior product design and offering the following advantages.

•Maximum Carbon Surface Area

-Optimizes Efficiency and Available Capacity

•Exceptional Adhesion of Granules

-Precludes Carbon Dusting

•Consistent Carbon Distribution

-Reduces Channeling

•Minimizes Pressure Loss

FCP Performance

The FCP products offer excep ional performance in efficiency and capacity compared with products manufactured from carbon lurry media or car- bon/polyester pads. Figure 1 on the reverse side illustrates that the FCP efficiency is at least 30% better than a carbon slurry pleat. The minimum capacity is six times greater as shown in the table below.

Options

The FCP Series is v ilable in standard capacity and high capacity models in 2” and 4” depths.

200 Series - Standard Capacity

Te filter media has a carbon mass loading of 7 oz. per sq. yd. of material.

300 Series - High Capacity

The filter media has a carbon mass loading of 14 oz. per sq. yd. of material.

The FCP Series is available with three contaminant specific activated carbon products.

201or 301 - Removal of VOC’s

202or 302 - Removal of Acid Gases

204or 304 - Removal of Alkaline Gases

This table illustrates the differences n overall capac ty of three carbon prod- ucts.

	Capacity to
Product	75% Breakthrough
Carbon Slurry	1.6 grams
FCP 200 Series	25 grams
FCP 300 Series	63 grams

Flanders - Foremost in Air Filtration

Corporate Headquarters, St. Petersburg, FL 101