Honeywell 11255 manual Guide Specifications, Flanders - Foremost in Air Filtration

CAPACITIES AND DIMENSIONS

Nominal	(inch)	Nominal Size	375 fpm		500 fpm		Media	Weight
							Area
Depth		HxWxD (inch)	cfm	PD	cfm	PD		Each (lbs.)
							(sq. ft)
	E35-10201	10x20x1	420	.15	695	.35	2.4	.6
	E35-12201	12x20x1	500	.15	834	.35	2.9	.6
	E35-12241	12x24x1	600	.15	1000	.35	3.5	.5
	E35-14201	14x20x1	580	.15	975	.35	3.4	.6
1	E35-14251	14x25x1	730	.15	1215	.35	4.3	.8
	E35-15201	15x20x1	625	.15	1040	.35	3.7	.6
	E35-16201	16x20x1	667	.15	1110	.35	3.6	.6
	E35-16251	16x25x1	834	.15	1390	.35	4.6	.7
	E35-18241	18x24x1	900	.15	1500	.35	5.3	.8
	E35-18251	18x25x1	940	.15	1565	.35	5.5	.8
	E35-20201	20x20x1	834	.15	1390	.35	4.6	.7
	E35-20241	20x24x1	1000	.15	1667	.35	5.8	.8
	E35-20251	20x25x1	1042	.15	1735	.27	5.5	.8
	E35-24241	24x24x1	1200	.12	2000	.35	6.4	.9
	E35-10202	10x20x2	420	.12	695	.27	4.0	.7
	E35-12202	12x20x2	500	.12	834	.27	4.8	.8
	E35-12242	12x24x2	600	.12	1000	.27	5.8	.8
	E35-14202	14x20x2	580	.12	975	.27	5.6	.9
2	E35-14252	14x25x2	730	.12	1215	.27	7.1	.9
	E35-15202	15x20x2	625	.12	1040	.27	6.0	.9
	E35-16202	16x20x2	667	.12	1110	.27	6.6	.9
	E35-16252	16x25x2	834	.12	1390	.27	8.3	1.1
	E35-18252	18x25x2	940	.12	1565	.27	9.1	1.3
	E35-20202	20x20x2	834	.12	1390	.27	8.3	1.1
	E35-20252	20x25x2	1042	.12	1735	.27	10.3	1.3
	E35-24242	24x24x2	1200	.12	2000	.27	12.3	1.5
	E35-12244	12x24x4	600	.10	1250	.30	11.6	1.5
	E35-16204	16x20x4	667	.10	1390	.30	11.8	1.7
	E35-16254	16x25x4	834	.10	1735	.30	15.0	2.0
4	E35-20204	20x20x4	834	.10	1735	.30	15.0	2.0
	E35-20254	20x25x4	1042	.10	2170	.30	20.2	2.3
	E35-24244	24x24x4	1200	.10	2500	.30	22.3	2.5
	E35-25294	25x29x4	1510	.10	2520	.30	27.7	4.0
	E35-28304	28x30x4	1750	.10	2920	.30	32.1	6.0

PD represents clean pressure drop in inches w.g. The recommended final pressure drop for all models is 1.0 inch w.g. System design may dictate a lower change-out point.

Performance values stated may be ave ages typical of the products listed. Contact factory for actual performance test reports on specific products.

	Guide Specifications
1.0 General		upstream and downstream sides.
1.1	Medium efficiency p ea ed fil ers shall be E35 a s	3.0 Performance
	manufactured by F anders.
		3.1 Initial and final resistances shall not exceed the
1.2	Filters shall be UL 900 Class 2 listed.
		scheduled values.
2.0 Filter Construction		3.2 Media area must equal or exceed that of the
2.1	Filters shall be constructed of reinforced,	specified filter.
		3.3 The average efficiency shall be as determined by
	non-woven cotton/synthetic blend media laminat-
	d to an xpanded metal grid on the air leaving	the ASHRAE Standard 52.1 test methods.
	side and formed into V-wedge pleats.	3.4 The manufacturer shall guarantee performance
2.2	Frames shall be moisture-resistant chipboard	as stated in its literature within tolerances as out-
	with perforated steel support grilles on the	lined in Section 7.4 of ARI Standard 850.

Flanders - Foremost in Air Filtration

46 Corporate Headquarters, St. Petersburg, FL