Honeywell 11255 manual Adsorber Protection, Packaging, Disposal, Physical Data

Adsorber Protection

Particulate contamination must be considered when utilizing gas/vapor phase adsorbers. As a minimum, a Flanders prefilter with an efficiency of 25-30% per ASHRAE Std. 52.1 should be installed on the upstream side of the Superflow-VC adsorber in order to extend the service life by significantly reducing dirt build-up. Even higher efficiency pre- filtration should be considered when system design allows for additional space and static pressure.

Packaging

Each Superflow-VC Adsorber is individually sealed in a polyethylene bag prior to placement in a heavy duty shipping carton. The bag protects the adsorber from being expended prematurely and also facili- tates clean and easy jobsite changeouts. The spent adsorber can be placed in the plastic bag and then in the carton for disposal.

Disposal

Routine disposal is usually permitted if spent adsor- bers with Superflow-VC 201 media have been used for normal IAQ applications. Spent adsorbers filled with impregnated carbon and those used in indus- trial applications may need special handling. Local environmental authorities should be consulted prior to disposal.

Physical Data:

Top and bottom end plates: High strength ABS plastic

Vertical Struts: Aerodynamically designed extruded aluminum

Vertical Supports: Steel rods on the downstream side

Carbon Panels: Eight 1” (25 mm) moistu e- resistant corrugated kraft honeycomb grids filled with granular carbon media c ntained by fine mesh nylon screen

Panel Sealant: Non-volatile ype, applied along the entire panel periphery

Activated Carbon Media: Virgin coconut shell base, 4 x 8 US mesh ize, minimum 60% CTC activity

Flanders - Foremost in Air Filtration

Corporate Headquarters, St. Petersburg, FL 109