Honeywell 11255 manual SAR-1Pad for Air Intake, SAR-1Panels for Air In ake

SA600-G10 Diffusion Media for Air Intake

Models SA600-xxx

For downdrafts and prep stations. This filter pro- vides the highest level of protection against paint damaging particles available today. In addition to its leading reputation in filtering ability, the SA600- G10 is able to withstand high temperature applica- tions, up to 140 degrees Celcius! This filter does not discolor or break down in the heated booth environment. Other leading media using traditional tackifiers and PVC resins, produce a heavy discol- oration and the media expands reducing the filter- ing ability.

Flanders’ re-engineered media and manufacturing process has virtually eliminated these flaws. Using ecologically sound materials, and eliminating PVC resins, the media discoloration and media expan- sion have been minimized. The SA600-G10 is a 1” diffusion media, and carries the prestigious G10 mark. G10 is a European standard for test per- formance, and only qualified media can claim this mark of distinction. It has a high dust holdi g capacity for long life, and stops all particles of pai t damaging size from entering a paintbooth when installed properly.

This product has a normal service life of 10 to 18 months, depending on outside air quality and usage. The filter is available in bulk olls or cut pads for your convenience. Cut pads a e cut in our facility to your booth requirements.

SAR-1 Pad for Air Intake

Models SAR1M-xxxxx

For use as an intake blanket on crossdraft booths.

The SAR-1 media, made in Switzerland, has a 1/2“ loft, and is optimally designed for efficiency and dust holding capacity. For crossdraft booths, the SAR-1 pad, sometimes referred to as a blanket, is tucked into the doors of the booth. There is usual- ly only one large pad on each door. Ov rsiz d SAR-1 media pads can be easily trimmed.

The SAR-1 media is a premium choice for c oss- draft requirements. The tackifier and heavily cal- lendered exit side allow for excellent particle reten- tion. The SAR-1 is a premium ch ice f r cr ssdraft filtration.

SAR-1 Panels for Air In ake

Model SAR1Pxx-xxxx

For use in crossdraft and some downdraft booths.The SAR-1 PANEL, made in Switzerland, is a premium choice for panel filtration. The SAR-1 PANEL is made from two media pads. A metal support is dielectrically heat sealed in between the two media layers providing support and rigidity.

The first media layer is designed to catch large par- ticles entering the booth. The second media layer is designed to catch the smaller particles. 100% of the fibers in the second layer are tackified to retain trapped particles. The combination of small fiber size and a callendered exit provide unsurpassed R-1 filtration.

The metal support is made from 9 gauge galva- nized steel, which will not rust. The support is formed into a rectangular shape and contains two crossbars for added stability.

When choosing the correct size, measure the metal support. The metal support will be 3/8” under the listed size. For instance, a 20x20 panel’s ring will measure 19-5/8 x 19-5/8. Crossdraft booths will have a series of housings that look like square or rectangular holes in the booth doors. Panel filters have extra media overlapping the metal support which act as gasketing when placing the panel filter inside the housing and create a tight seal to prevent any air bypass around the filter.

Flanders - Foremost in Air Filtration

Corporate Headquarters, St. Petersburg, FL 17