Honeywell 11255 manual Superflow-VCC rbon Weight Per Cell, Superflow - VC Performance Data

Superflow - VC Performance Data

Adsorber	Nominal Size			ADSORBER			FACE VELOCITY, fpm							Cell
			125			250			375			500
Model Number	H x W x D													Weight
(See Note 1)	inch													lb
		cfm	PD	Res	cfm	PD	Res	cfm	PD	Res	cfm	PD	R s
	(See Note 2)
SFVC-242412		500	0.10	0.11	1000	0.20	0.050	1500	0.33	0.040	2000	0.50	0.030	34
SFVC-122412	24 x 24 x 12	250	0.10	0.11	500	0.20	0.050	750	0.33	0.040	1000	0.50	0.030	17
Adsorber	Nominal Size			ADSORBER			FACE VELOCITY, m/s							Cell
			0.64			1.27			1.90			2.54
Model Number	H x W x D mm.													Weight
(See Note 1)	(See Note 2)	m3/s	PD	Res	m3/s	PD	Res	m3/s	PD	Res	m3/	PD	Res	kg
SFVC-242412	610x610x305	0.24	0.02	0.11	0.47	0.05	0.050	0.71	0.08	0.040	0.94	0.12	0.033	15.5
SFVC-122412	305x610x305	0.12	0.02	0.11	0.24	0.05	0.050	0.35	0.08	0.040	0.47	0.12	0.033	7.7

Notes:

1.*Insert Superflow-VC carbon type model number.

2.Actual size of adsorber header is 0.625” (16 mm) under on face height and width; actual adsorber depth is 11.5” (290 mm).

3.“PD” represents clean pressure drop in inch w.g. or kPa.

4.“Res” represents residence time in seconds.

Superflow-VC C rbon Weight Per Cell

		Superflow-VC Carbon Type
Adsorber
Size	201		202		204		205		209
Designator
	lb	kg	lb	kg	lb	kg	lb	kg	lb	kg
242412	25	11.4	29	13.1	28	12.6	29	13.1	33	14.9
122412	13	5.9	14	6.3	14	6.3	14	6.3	16	7.2

Guide Specifications

1.0 Products
1.1 Activated carbon adsorbers shall be tot l-deten-			2.4 The cell shall be assembled with aerodynamical-
tion type Superflow-VC models as manufactured			ly designed vertical front struts and vertical steel
by Flanders.			rod supports on the downstream side.
1.2 Model numbers and capacities of the adsorbers,			2.5 Each adsorber shall be sealed in a polyethylene
particulate prefilters and holding frames or hous-			bag before being placed in its shipping carton.
ings shall be as sp cifi d or as shown on the			3.0 Performance
drawings.
2.0 Construction			3.1 Activated carbon media shall be virgin coconut
			shell base, minimum 60% CTC activity by the
2.1 Adsorbers sha		be constructed of multiple car-	ASTM D-3467 test method, minimum apparent
bon-filled panels arranged in a V configuration.			density of 0.49 g/mL, minimum hardness of 97 by
Panels shall be 1” (25 mm) thick moisture-resist-			the ASTM D-3802 method and a minimum sur-
ant corrugated kra t honeycomb sealed to top			face area of 1100m2/g by the N2 BET method.
and	bottom end	plates with non-volatile adhe-	3.2 The SFVC201-242412 model shall contain no
sive.
			less than 25 lb (11.4 kg) of activated carbon. At
2.2 Pan	ls shall be completely filled with 4 x 8 US		2000 cfm (0.94 m3/s) it shall have an airway
m sh size activated carbon held in place by			resistance no greater than 0.50 inch w.g. (0.12
nylon screens.			kPa) and a residence time no less than 0.030
2.3 Top and bottom end plates shall be injection-			seconds.

molded high strength ABS plastic with integral headers.

110 110