Appendix B Installation of Remote Termination Panels (RTPs) - Latch/Unlatch RTP to rail
Latch/Unlatch RTP to rail
Step | Action |
1Mounting screws must be installed at each end of the mounting rail, with additional screws approx. every 8"(203mm) to prevent twisting of the rail.
2Insert one side of DIN rail at A.
C
B
DIN rail
A
3
4
Insert other side of DIN rail at B, and push B over the rail to snap into place.
To remove, using slot screwdriver to lift C up gently (plastic is fragile) to disengage at B. Lift up and over rail, then disengage at A.
Revision 5 | HC900 Hybrid Controller Installation and User Guide | 205 |
9/03 |
|
|