Device Programming
This menu is used to program keypads, receivers, and relay modules, etc.
Device Address 00 is always set as an alpha keypad assigned to Partition 1 with no sounder suppression options, and these settings cannot be changed.
From Data Field Programming mode, press #93 to display "ZONE PROG?" Press [0] repeatedly to display "DEVICE PROG?"
PROMPTEXPLANATION
| DEVICE PROG? |
|
| 1=YES 0=NO | 0 |
| ||
|
|
|
|
|
|
| DEVICE ADDRESS |
|
| 01 | |
|
Press [1] to enter Device Programming.
The device address identifies the device to the control. Enter the
Press [✱] to accept entry.
DEVICE TYPE | Select the type of addressable device as follows: |
|
00 | 00 | = device not used |
| 01 | = alpha keypad (6139/6160) |
| 02 | = |
Press [✱] to accept entry.
Alpha or Fixed-Word Keypad
03 = RF receiver (5881)
04 = output relay module (4204)
05 = voice (VIP) Module (4285/4286)
PROMPTEXPLANATION
01 CONSOLE PART.
1
If you selected device type 01 (alpha keypad), or 02
Press [✱] to accept entry.
01 SOUND OPTION
00
Keypads can be individually programmed to suppress arm/disarm beeps, entry/exit beeps and chime mode beeps. This helps prevent unwanted sounds from disturbing users in other areas of the premises.
Enter a number
01 = suppress arm/disarm & entry/exit beeps
02 = suppress chime mode beeps only
03 = suppress arm/disarm, entry/exit and chime mode beeps Press [✱] to accept entry.
RF Expander
PROMPTEXPLANATION
01 RF EXPANDER |
|
HOUSE I | 00 |
If you selected device type 03 (RF receiver), this prompt appears. Enter the
Press [✱] to accept entry.
VIP Module
PROMPTEXPLANATION
01 MODULE PART.
1
If you selected device type 05 (VIP Module) this prompt appears. Enter the partition number
Press [✱] to accept entry.
Press 00 + [✱] to exit Menu mode. Press ✱99 to exit Program mode.
– 24 –
