Honeywell W7761A specifications SrcDigIn2Sts Refer to the description for SrcDigIn1Sts

EXCEL 10 W7761A INPUT/OUTPUT DEVICE

Table C1. Input/Output Points (Right Continued).

Share (SH), Map (MA), Direct Access (DA)

E-Vision (EV): Calibrate (C), Monitor (M),

Parameter (P), Schematic (S)

Hardware Configuration (HW),

Manual Point (MN), Test (TS)

SH	MA	DA	EV	HW	MN	TS	Comments
							SrcDigIn2Sts: Refer to the description for SrcDigIn1Sts.
X	X	X	M				DI2State:
							Refer to the description for DI1State.
							SrcDigIn3Sts: Refer to the description for SrcDigIn1Sts above.
X	X	X	M				DI3State:
							Refer to the description for DI1State.
							SrcDigIn4Sts: Refer to the description for SrcDigIn1Sts above.
X	X	X	M				DI4State:
							Refer to the description for DI1State.
X	X	X	M				SrcHumidAI5 is an output network variable corresponding to the voltage or current
							input channel (AI5) if the selection for humidity sensor was made via ncirioIoSelect
							for AI5.
X	X	X	M				SrcHumidAI6 is an output network variable corresponding to the voltage or current
							input channel (AI6) if the selection for humidity sensor was made via ncirioIoSelect
							for AI6.
X	X	X	M				SrcPressAI5 is an output network variable corresponding to the voltage or current
							input channel (AI5) if the selection for a pressure sensor was made via
							ncirioIoSelect for AI5.
X	X	X	M				SrcPressAI6 is an output network variable corresponding to the voltage or current
							input channel (AI6) if the selection for a pressure sensor was made via
							ncirioIoSelect for AI6.
X	X	X	M				SrcTempAI1 is an output network variable corresponding to the analog input
							channel (AI1). This NV will contain AI1 temperature value with the OffsetCal1AI1
							applied to it.
X	X	X	M				SrcTempAI2 is an output network variable corresponding to the analog input
							channel (AI2). This NV will contain AI2 temperature value with the OffsetCal1AI2
							applied to it.
X	X	X	M				SrcTempAI3 is an output network variable corresponding to the analog input
							channel (AI3). This NV will contain AI3 temperature value with the OffsetCal1AI3
							applied to it.
X	X	X	M				SrcTempAI4 is an output network variable corresponding to the analog input
							channel (AI4). This NV will contain AI4 temperature value with the OffsetCal1AI4
							applied to it.
X	X	X	M				SrcVoltageAI is an output network variable corresponding to the voltage or current
							input channel (AI5 or AI6) if the selection for a voltage sensor was made via
							ncirioIoSelect.

54 74-2699