INTRODUCTION IMPORTANT PRECAUTIONS
P R E - A S S E M B LY
note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
A S S E M B LY STEP 1
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
PINK HARDWARE BAG CONTENTS :
BOLT (A) | SPRING WASHER (B) | ARC WASHER (C) |
15 mm | 8 mm DIAMETER | 8 mm Diameter |
Qty: 6 | Qty: 6 | Qty: 6 |
CONSOLE MAST |
|
SPRING WASHER (B) |
|
BOLT (A) | WASHER (C) |
| CONSOLE WIRES |
BASE FRAME |
|
AOpen PINK HARDWARE BAG.
BConnect the CONSOLE WIRES from the BASE FRAME to the bottom of the CONSOLE MAST.
CAttach LEFT CONSOLE MAST using 3 BOLTS (A), 3 SPRING WASHERS (B) and 3 ARC WASHERS (C).
DRepeat on other side.
*Note: Be careful not to pinch any wires while assembling the masts.
