Hotpoint RGB628G, RGB528ER, RGB524PR, RGB52yGEP, RGB528GER StindhgPilotModels, sutia%@Surner#gmi#:@R

Heater Pilot Flame ~–

4-.Turn the OWN CONTROLhob to a setting above200°E The pilotflame willincrease in size and impingeon the temperature-response element. The oven burner willtight in 30-90 seconds.

The oven burner willoperate until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintainthe oven at the temperature indicated by the OWiWCONTROLknob.

sutia%@Surner#gmi#:@R

Operation of all cooktop and oven burners should be checked after the pilots have been lighted (on models so equipped) and range and gas supply lines have been carefully checked for leaks.

StindhgPilotModels

Select a top burner knob and simultaneously push in and turn to HI position. The burner should light within a few seconds. Try each burner in succession until all burners have been checked.

Electic I@ition Models

Select a top burner knob and simultaneously push in and turn to LIT’Eposition. Youwillhear a snapping sound indicating proper operation of the spark module. Once the air has been purged from tl~esupply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the L~TEposition. Try each burner in succession until all burners have been checked.

.—

QuaIi& ofmaRnes

The combustionqualityof burner flamesneeds .

to be determined visually.	d
	6
	(A) YeMowaames—
	Callfor service
	(B) Yeuow tips 011
	‘oUkr cones—
	Normalfor LP gas
	(c) %& blue flmee
	Normalfor natiral gas

Hburner flmes look like (A),callfor service. Normal burner flames should look like (R) or (C), depending on the type of gas you use.

With LP gas, some yellowtipping on outer cones is norinal.

OwanSurmsr lgm;8i@m
Youroven is designed to operate quietlyand
automatically.To operate the oven,turn the
OVENCONTROLknob to a setting above 200°R
After 30-90seconds, the oven burner willignite
and burn untilthe set temperature is reached.	;
The oven burner will continue to cycle on and	[=

off as necessary to maintain the oven at the temperature indicated by the O~N CONTROL [ knob.

Eleetic i~ition mOdelS require electica~ power to operate. ‘Theoven cannot be lit during a power outage. Gas willnot flowunless the glow bar is hot.

E the oven is in use when a power outage occurs, the oven burner will shut off and cannot be re-lit until power is restored.

.——.-,;

.---- -——..——-—...— .---—— -—--.--=...-—.r . .-—- .—