Hotpoint RGB52yGEP, RGB628G 1Twn offgas supp~at tieWall, Ttwn offtieelectiealpower to tie rmge

3;” 1/21/open-end wrench

~Tm]n open-end or socket wrench, I or adjustable wrench

~Flat blade screwd~iver (small)

M PR&PmEMH6E FOR COHWERS!OH

(1)Twn offgas supp~at tieWall.

(2) Ttwn offtieelectiealpower to tie rmge.

If range has not yet been connected to gas supply, or if flexibleconnectionwas made, range maybe pulled out horn the -wallto make conversioneasier.

~ 1. For models equipped with sealed burners, +-removethe storage drawer, broiler drawer or kick

~panel and locate he pressure regulator at rear of

~the range.

Y )

\ fi$.

Remove Screws

Access Cover aj%~-J

On some models, you may have to remove an access cover also.

For models equipped with dual burners, remove the cooktop and locate the pressure regulator at right rear of range.

~.Follow l-hedirections in box m, E or ❑ that match your regulator type.

-.

‘.

. .

“.,

If it is this regulator:

1.Use a coin to remove the cap from the pressure regulator.

2.Turn the cap over and hook it into the slots. The type of gas to be used should now be visible on the top of the cap.

❑Note: On some models the shut-off valve may be in a different location.

this protective cap’	Cap Assembly
except for conversion

If it is this regulator:

1.Unscrew the plastic-protectedhex-nut cap assembly from the top center of the regulator.

~.Carefullypry the protective plastic cap off the threaded metal cap. Gently pull the plastic washer off the other threads.

~.Replacethe plastic cap onto the threaded end displaying the gas type you desire. Press the plastic washer onto the remaining threads.

~.Reinsert the cap assembly into the regulator. Do not overtighten, but make s~~rethe washer is seated securely.

. .. . . —— — ... ......——-.. —