Install dual media rolls on separate scrollers
The dual media roll printing function allows you to print simultaneously on two media rolls of up to
●Maximum media roll width — 50 inches.
●Use identical media rolls — type and width. The wound diameter (length of media remaining) on each roll does not have to be the same.
●Only print on the outside of the media rolls. Printing on the inside of the media rolls cannot be used for dual media roll printing.
●When using the dual roll printing option for media on separate scrollers, there is no automatic monitoring of the media end for the media on the
●Start winding two media rolls simultaneously to ensure the wound diameter is identical.
CAUTION The printer does not automatically mask the gap between media rolls. If you do not take this into account, when you send a print job, any data in the unmasked area will be printed on the platen. This is also the case for test prints.
CAUTION Do not touch heater surfaces in the paper path. This may cause burns.
Handle media rolls with care. They can be heavy and difficult to move in confined spaces. In some cases, two people should move and install media rolls. Dropping a media roll could cause personal injury or damage to the printer.
The printer's front panel messages will guide you through the process of loading media. To install a media roll:
1.If you are installing dual rolls in the printer for the first time you will need to first install an additional pair of media edge guards.
a.Attach the slider (2) to the bottom of the edge guard (3) with the two attachment screws (1), but do not fully tighten the screws at this stage.
How do I use dual media rolls?
ENWW | Install dual media rolls on separate scrollers | 95 |