●1 x cap side edge guard for use with liner (4)

How do I print with a liner

1.Install the media in the printer.

For double-sided printing (Refer to How do I perform double-sided printing).

For mesh tarpaulin printing (Refer to Print on mesh tarpaulin (without dedicated liner)).

2.Raise the printheads (Refer to Change the printhead height).

CAUTION Always make sure the printheads are raised when using the special edge guards. If the printheads are in the lowered position, the media may touch the printheads and cause serious damage.

3.Insert cap side special edge guard (1) under the edge guard (2), refer to Use the media edge guards.

ENWW

Use the special edge guards for use with a liner

179