menus panel front about me Tell
Cap cleaning (CAP CLEANING)
Use this option to move the printhead carriage to the wiper position so that you can clean the capping unit manually.
Parameters: none.
Wiper cleaning (WIPER CLEANING)
Use this option to lift the wiper blade so that you can clean the wiper blade manually.
Parameters: none.
Washing with printheads (WASH PRINTHEADS)
Use this option to fill the cap with ink to soak the printhead (nozzle surface) in the ink for a minimum of 1 to 2 hours to remove nozzle clogging. If possible, leave the printer overnight.
Use this option when nozzles cannot be fixed by cleaning repeatedly.
Parameters: none.
NOTE Always perform Cleaning (normal) after filling the cap.
If the printhead surface is not clean even after leaving the printer overnight, then contact HP Support.
Printhead height (PH HEIGHT ADJ)
Use this menu option to adjust the printhead height.
The cap is opened after performing this operation and the carriage height can be adjusted, see Change the printhead height.
Parameters: none.
292 | Chapter 14 Tell me about front panel menus | ENWW |