Parameters: none.

Heater H/W version display (HEATER HW VER)

This option displays the heater hardware version.

Parameters: none.

Heater F/W version display (HEATER FW VER)

This option displays the heater firmware version. If the heater cannot be recognized, "--.-" is displayed.

Parameters: none.

HEB board H/W version (HEB Version)

This option displays the HEB hardware version.

Parameters: none.

USB address (USB ADDRESS)

This option displays the printer USB address.

Parameters:none.

USB speed (USB SPEED)

This option sets the USB port speed.

Parameters: HIGH, FULL

Tell me about front panel menus

ENWW

The SETUP menu

299