CAUTION Inserting the media obliquely or inserting media with wrinkles causes a media jam or skewed feed.
a.Insert the top edge of the media (1) into media feeder (2) while stretching it outwards to prevent any wrinkling.
b.If the media curls up (1) or down (2), making it hard to insert into the media feeder, place a backing sheet (3) on or under the curled media to make loading easier.
How do I perform basic media operations?
c.At the front of the printer, use the black media advance switch to feed the media through the media feeder until it almost reaches the floor.
d.Smooth out the media from the center towards the edges of the platen to tension the center area of the media.
ENWW | Offset media loading using the main scroller | 87 |