If the operation finishes successfully, the printer returns to the online or offline state.

If it terminates unsuccessfully, an error message will be shown. If this occurs, retry the operation from the step in this procedure where you raised the media load lever.

21.Set the “VACUUM” and “UNSTICK MODE” values with the front panel according to the type of media you are using. Refer to Unstick mode (UNSTICK MODE).

NOTE It is recommended to perform a normal printhead recovery before starting to print on the back of the media. Refer to Normal printhead recovery.

22.Print on the back of the media.

NOTE The output image from the RIP does NOT need to be rotated.

ENWW

Printing on the back of the media after rewinding

performprinting sided-double

Ido

How 137