4.Release one cable from the cable guide (callout 1), and then remove two screws (callout 2). Figure 1-84Remove the low-voltage power supply assembly (4 of 9)

2

1

 

5.Remove the power receptacle (callout 1) and guide (callout 2) as an assembly.

Reinstallation tip Make sure that these parts are correctly assembled, before reinstalling the

receptacle and guide. See Reinstall the low-voltage power supply on page 68.

Figure 1-85Remove the low-voltage power supply assembly (5 of 9)

2

1

ENWW

Removal and replacement procedures 65