HP LaserJet Pro 100 CE866A Document feeder base assembly, TIP:, Figure, Remove the document feeder base assembly, Before proceeding, remove the following components:

Document feeder base assembly

Before proceeding, remove the following components:

●Document feeder input tray. See Document feeder input tray on page 69.

●Document feeder cover. See Document feeder cover on page 70.

Remove the document feeder base assembly

1.Disconnect one FFC (callout 1), and then release the adhesive FFC protector on the document feeder base (callout 2).

TIP: Use two-sided tape to replace the FFC protector during reassembly.

Figure 1-102Remove the document feeder base assembly (1 of 3)

1

2

ENWW Removal and replacement procedures 75