HP 100 CE866A manual Control panel, Remove the control panel

Control panel

CAUTION: ESD sensitive.

Before proceeding, remove the following components:

●Right cover. See Right cover on page 16.

●Left cover. See Left cover on page 17.

●Document feeder. See Document feeder on page 18.

●Document feeder hinges. See Document feeder hinges on page 21.

●Top door, rear-top cover, and delivery cover. See Top door, rear-top cover, and delivery cover on page 22.

Remove the control panel

1.Disconnect one FFC (callout 1), and then release the FFC from the guide (callout 2).

CAUTION: Do not bend or fold the flat flexible cables (FFCs) during removal or installation. Also, do not straighten pre-folds in the FFCs.

Figure 1-30Remove the control panel (1 of 3)

2

1

ENWW Removal and replacement procedures 29