Reinstall the low-voltage power supply

Make sure that the power receptacle (callout 1), guide (callout 2), and the ferrite (callout 3) are correctly assembled before installing them.

Figure 1-90Reinstall the low-voltage power supply

1

2

3

Installing a replacement low-voltage power supply

Release two tabs (callout 1), remove the cover (callout 2) from the discarded low-voltage power supply, and then install the guide on the replacement assembly.

Figure 1-91Installing a replacement low-voltage power supply

2

1

68 Chapter 1 Removal and replacement

ENWW