HP LaserJet Pro 100 CE866A Inner cover, Figure, Remove the inner cover, Before proceeding, remove the following components:

Inner cover

Before proceeding, remove the following components:

●Right cover. See Right cover on page 16

●Left cover. See Left cover on page 17.

●Document feeder. See Document feeder on page 18.

●Document feeder hinges. See Document feeder hinges on page 21.

●Top door, rear-top cover, and delivery cover. See Top door, rear-top cover, and delivery cover on page 22.

●Control panel. See Control panel on page 29.

●Left-front cover. See Left-front cover on page 31.

Remove the inner cover

1.Remove one spring (callout 1), and then remove the door retainer arm (callout 2). Figure 1-37Remove the inner cover (1 of 4)

2

1

ENWW Removal and replacement procedures 35