2.Remove two screws (callout 1).

TIP: These screws require a #10 torx driver

Figure 1-103Remove the document feeder base assembly (2 of 3)

1

3.Open the document feeder base, and then carefully remove it from the product.

CAUTION: Do not damage the FFC (callout 1) that runs through the document feeder base. Carefully feed the FFC through the slot during removal and during replacement.

Figure 1-104Remove the document feeder base assembly (3 of 3)

1

76 Chapter 1 Removal and replacement

ENWW

Page 94
Image 94
HP 100 CE866A manual Enww