HP 382 manual 139

Menu item	Description
Timeouts	Sets the amount of time in seconds the printer waits to receive an
Print Timeout	end-of-job message before canceling the remainder of the print
Disabled	job
1–255	Notes:
	• 90 seconds is the factory default setting.
	• When the timer expires, any partially printed page still in the
	printer is printed, and then the printer checks to see if any new
	print jobs are waiting.
	• Print Timeout is available only when using PCL or PPDS
	emulation. This setting has no effect on PostScript emulation
	print jobs.
Timeouts	Sets the amount of time in seconds the printer waits for additional
Wait Timeout	data before canceling a print job
Disabled	Notes:
15–65535	• 40 seconds is the factory default setting.
	• Wait Timeout is available only when the printer is using
	PostScript emulation. This setting has no effect on PCL or
	PPDS emulation print jobs.
Print Recovery	Lets the printer automatically continue printing from certain
Auto Continue	offline situations when not resolved within the specified time
Disabled	period
5–255	Notes:
	• Disabled is the factory default setting.
	• 5–255 is a range of time in seconds.
Print Recovery	Specifies whether the printer reprints jammed pages
Jam Recovery	Notes:
On
	• Auto is the factory default setting. The printer reprints
Off
	jammed pages unless the memory required to hold the pages
Auto
	is needed for other printer tasks.
	• On sets the printer to always reprint jammed pages.
	• Off sets the printer to never reprint jammed pages.
Print Recovery	Lets the printer successfully print a page that may not have printed
Page Protect	otherwise
On	Notes:
Off	• Off is the factory default setting. Off prints a partial page when
	there is not enough memory to print the whole page.
	• On sets the printer to process the whole page so that the
	entire page prints.

Understanding printer menus

139